This project demonstrates the FAT file system with USB Host Mass Storage as the storage medium.

The demo is configured for use with the ADSP-SC589 EZ-Board equipped with the Analog Devices ADSP-SC589 MCU. The hardware configuration is shown below:

Procedure

  1. Connect the USB-UART connector to a host PC and open a terminal connection to the virtual serial port (115200@8N1).
  2. Download and start the project.
  3. Connect a mass storage device (for example a USB stick) to the EZ-Board's USB_OTG connector using a microUSB-to-USB-A cable.
  4. A complex file system test starts to run. Its results are printed to the terminal window.

Note: This project was developed using CrossCore Embedded Studio v2.9.2.0.